Page 201 - Cable Art Inc Catalog

Seismic Cable Fittings

Seismic Anchor Retrofit

Seismic Anchor Retrofit Fittings are offered in 4 These cable mounts are designed to be used with Gold or
mounting sizes and are designed for use with preexisting Orange Cable and maintain the rated break strength of both sizes
equipment and systems that require seismic bracing. without the need for a thimble.
This fitting is slotted to allow an existing fastener to be May be used at both ends of the cable for anchoring equipment.
loosened, and the Fitting positioned without removal of
the fastener.
SEISMIC ANCHOR FITTINGS RETROFIT STEEL
PART LOOS & CO. “Y” “L” “W”
“Y” NO. PART NO. OPENING LENGTH WIDTH
76FSAR08 SAFR-1/4 .26" 1.80" 1.77"
“L” 76FSAR12 SAFR-3/8 .42" 1.80" 1.77"
76FSAR16 SAFR-1/2 .53" 1.80" 1.77"
76FSAR20 SAFR-5/8 .66" 1.80" 1.77"
“W” Zinc Plate Finish SEISMIC BRACING

Seismic Anchor 2-Hole Retrofit

Seismic Anchor 2-Hole Retrofit Fittings are offered in 4 These cable mounts are designed to be used with Gold or Orange
mounting sizes and are designed for attaching seismic Cable and maintain the rated break strength of both sizes without
cable bracing to cable trays, HVAC equipment, clevis the need for a thimble.
hangers, sprinkler systems, and trapeze supports in a The two cable mounts may be used at both ends of the cable for
retrofit environment. anchoring equipment and are ideal for 2-way bracing.
This fitting is slotted to allow an existing fastener to be
loosened, and the Fitting positioned without
removal of the fastener. SEISMIC ANCHOR FITTINGS 2-HOLE RETROFIT STEEL
PART LOOS & CO. “Y” “L” “W”
“Y” NO. PART NO. OPENING LENGTH WIDTH
76FSAR208 SAF2R-1/4 .26" 1.90" 1.77"
76FSAR212 SAF2R-3/8 .42" 1.90" 1.77"
“L”
76FSAR216 SAF2R-1/2 .53" 1.90" 1.77"
76FSAR220 SAF2R-5/8 .66" 1.90" 1.77"
“W” Zinc Plate Finish

Seismic Low-Pry

Seismic Low Pry Fittings are offered in 6 mounting sizes An inspection hole is provided to ensure that the cable is placed
and are specifically designed to reduce the prying effect on in the correct position within the groove. The LPF has the
fasteners. They will accept lag bolts, bolts, and concrete lowest prying factor yet to be achieved.
anchors in both metric and imperial sizes.
The cable is nested in the groove provided, and exits through SEISMIC LOW-PRY FITTINGS STEEL
two chamfered slots (to prevent damage to the outer wires
of the cable). PART LOOS & CO. “S” “D”
NO. PART NO. HOLE SIZE DIA.
These cable mounts are
designed to be used with “S” 76FLP08 LPF-1/4 .26" 2.74"
Gold, Orange, or Green Cable 76FLP12 LPF-3/8 .41" 2.74"
and maintain the rated break 76FLP16 LPF-1/2 .52" 2.74"
strength of all three sizes. 76FLP20 LPF-5/8 .66" 2.74"
76FLP24 LPF-3/4 .77" 2.74"
76FLP28 LPF-7/8 .89" 2.74"
“D” Zinc Plate Finish

189

Cat21 S11 179-189 .indd 189 12/3/20 1:31 AM