Page 50 - Cable Art Inc Catalog

Invisiware System TENSIONERS
®

Tensioners that are hidden inside the post.

The Invisiware receiver slides into a pre-drilled hole in the end rotate the receiver around the male threads to draw the

post. The inside of the receiver is female-threaded to accept stud and cable further inside the receiver. When installed,
the male-threaded swaging stud (below) that is attached to only the head of the Invisiware receiver is exposed on the
the cable. The head of the receiver is broached for an Allen outside of the post.
wrench. To tension the cable, insert the Allen wrench and

Invisiware Receiver

“T” “H”

“D”

“L”
“C”

INVISIWARE RECEIVER 316SS
USE WITH
SWAGING “C” “L” “L” “L” “L” “L” “L” “L” “L”
“H”
“T”
STUD
“D”
CABLE 20FS4 .437" 3/16" 5/16"-24 .537" 20F4012 20F4022 20F4032 20F4042 20F4072 20F4082 20F4052 = 3.5625"
LENGTH
LENGTH
LENGTH
LENGTH LENGTH
LENGTH
LENGTH
CAP LENGTH
SWAGED TENSIONERS Order Swaging Stud separately, page 38. 5/16"-24 .537" 20F4012 20F4022 20F4032 20F4042 20F4072 20F4082 20F4052 20F4062
= 2.375"
= 2.530"
= 1.562" = 1.812"
= 2.030" = 2.301"
= 3.030"
DIA.
HEX
DIA.
NO.
DIA.
THREAD
1/8"
20F4062
20FS6
.437"
3/16"
3/16"
N.A.
N.A.
N.A.
N.A.
20F8052
20F8032
20F8042
20F8022
7/16"-20
20FS8
.531"
1/4"
7/32"
.646"
5/16"
.687"
20F1242
N.A.
5/16"
N.A.
20FS10
N.A.
20F1252
9/16"-18
N.A.
20F1232
N.A.
.865"
N.A.
N.A.
N.A.
9/16"-18
3/8"
.865"
N.A.
N.A.
20F1252
20FS12
5/16"
20F1242
.687"
20F1232
Invisiware Threaded Swaging Stud
“T”
“D”
INVISIWARE ®
The Invisiware threaded stud is swaged onto the end of the cable and THREADED SWAGING STUD SWAGE 316SS
used with the Invisiware receiver (above). When used alone in a metal CABLE PART “T” “D” DIAMETER
end post, it becomes a stop-end (non-tensioning end) fitting that is DIA. NO. THREAD AFTER SWAGED
completely hidden inside the end post. The threaded surface is coated 1/8" 20FS4 5/16"-24 .250"
with a baked-on molybdenum-based dry film lubricant to prevent the 3/16" 20FS6 5/16"-24 .250"
threads from binding when tensioned and in extreme environments.
1/4" 20FS8 7/16"-20 .375"
5/16" 20FS10 9/16"-18 .500"
3/8" 20FS12 9/16"-18 .500"
Moly coated.
38
Cat21 S3 33-67.indd 38 12/2/20 11:42 PM