Page 47 - Cable Art Inc Catalog

Stud Tensioning System TENSIONERS

Classic Countersunk

Stud Tensioner

“L”
“B”
The Classic Countersunk Stud Tensioner
is a great way to terminate cable in a flush “C”
fitting. An 82-degree countersink makes
the bevel sit flush for a clean, simple look. “T”
To be used on straight runs only. “D”

CLASSIC COUNTERSUNK STUD TENSIONER SWAGE 316SS
CABLE PART “T” “B” “L” “D” “C”
DIA. NO. THREAD BARREL OPEN CLOSED BARREL DIA. CAP SIZE
1/8" 15ACT40802 1/4"-28 1.830" 4.375" 3.250" .375" .552"
3/16" 15ACT60802 1/4"-28 1.830" 4.875" 3.813" .375" .552"
HANDY CRIMP* CRIMP 316SS
1/8" 15ACT40812 1/4"-28 1.830" 4.875" 3.813" .375" .552"
3/16" 15ACT60812 1/4"-28 1.830" 5.250" 4.125" .375" .552"
*Requires 82TST20 Handy Crimp Tool. See Tools, page 228.

Classic Ball Stud Tensioner SWAGED TENSIONERS

“L”
“B”
The Classic Ball Stud Tensioner is a simple
fitting that will take the angle of a stair “C”
railing. The mounting holes must be drilled
at the true angle or with a slot. “T”
“D”

CLASSIC BALL STUD TENSIONER SWAGE 316SS
CABLE PART “T” “B” “L” “D” “C”
DIA. NO. THREAD BARREL OPEN CLOSED BARREL DIA. CAP SIZE
1/8" 15ABT40802 1/4"-28 1.315" 3.813" 2.688" .375" .615"
3/16" 15ABT60802 1/4"-28 1.315" 4.375" 3.250" .375" .615"
1/4" 15ABT81002 5/16"-24 1.300" 4.563" 3.500" .437" .625"
HANDY CRIMP* CRIMP 316SS
1/8" 15ABT40812 1/4"-28 1.315" 4.375" 3.250" .375" .615"
3/16" 15ABT60812 1/4"-28 1.315" 4.750" 3.625" .375" .615"
*Requires 82TST20 Handy Crimp Tool. See Tools, page 228.

35

Cat21 S3 33-67.indd 35 12/2/20 11:42 PM