Page 49 - Cable Art Inc Catalog

Top Hat System TENSIONERS
™

Top Hat Toggle Jaw

“L”
“B”
Utilizing clevis-style ends for cable
attachment, this system allows
for connection to eye bolts, tee- “G”
stock, angle iron, flat bars, loops,
etc. The toggling feature allows “T” “D”
for angled takeoff without the use “J” “S”
of additional hardware. Toggle
ends come standard with
a clevis pin and ring pin. SWAGE 316SS
However, this fitting is TOP HAT TOGGLE JAW
available with screw and “B” “L” “D” “J” “S” “G”
JAW
“T”
LENGTH
JAW
PIN
lock nut upon request. CABLE PART THREAD BARREL OPEN CLOSED BARREL DEPTH SIZE WIDTH
DIA.
NO.
DIA.
LENGTH
For matching 1/8" 40A40204 6 mm 3.63" 5.900" 5.000" .372" .66" .25" .290"
non-tensioning fitting,
see Classic Toggle Jaw, 3/16" 40A60204 6 mm 3.63" 6.150" 5.300" .372" .66" .25" .290"
page 70.
Top Hat Deck Toggle SWAGED TENSIONERS

“L”

“B”

Deck toggles provide a face-mount “K”
solution while allowing for angled takeoff.
The deck toggle fittings are attached “T” “S”
utilizing two screws through the deck “D”
toggle base. Mounting surfaces include
wood posts or blocking, on either side
of a common post by through-
bolting, or drilling and tapping TOP HAT DECK TOGGLE SWAGE 316SS
a metallic post. The articulation “B” “L” “D” “K” “S”
range of this deck toggle end CABLE PART “T” BARREL LENGTH BARREL HOLE SCREW
fitting is 140 degrees. DIA. NO. THREAD LENGTH OPEN CLOSED DIA. SPACING SIZE
For matching non-tensioning 1/8" 40A40404 6 mm 3.63" 5.375" 4.475" .372" 1.32" .25"
fitting, see Classic Deck Toggle, 3/16" 40A60404 6 mm 3.63" 5.550" 4.700" .372" 1.32" .25"
page 71. For Mounting Hardware, see pages 89-90.

37

Cat21 S3 33-67.indd 37 12/2/20 11:42 PM