Page 80 - Cable Art Inc Catalog

Non-Tensioning Fittings NON-TENSIONERS

Frequently, a tensioning device is not required on both ends of the cable,
such as where the run is short or when the cables are cut and swaged on site.

Invisiware Radius Ferrule
®

“L”
“D”
“C”

“A”
.170”

Often used in combination with the Invisiware receiver (pages 38-39), this fitting is also
hidden inside the end post with only the head exposed on the outside of the post. When
installed, it looks the same as the Invisiware receiver but is less costly.
Invisiware radius ferrules are used with pipe and with round, square, or rectangular metal
tubing. Pipe ends are counterbored, so the full perimeter of the head rests on a flat
surface in the pipe. The head rests on the outside wall of a flat-sided metal post. A plastic
washer is included and acts as a scratch-resistant barrier between the head of the fitting
and the metal post.
For use in wood, the Invisiware INVISIWARE RADIUS FERRULE SWAGE 316SS
radius ferrule can rest against the CABLE PART “D” DIAMETER “L” LENGTH “C” HEAD “A” SHOULDER
outside of the post or the post can be DIA. NO. AFTER SWAGED AFTER SWAGED DIAMETER DIAMETER
counterbored with the radius ferrule 1/8" 20FRF4 .250" .750" .537" .437"
recessed in the post. For
wood applications, also order a 3/16" 20FRF6 .250" .750" .537" .437"
Stainless Steel Washer, page 86. 1/4" 20FRF8 .375" 1.000" .646" .531"
5/16" 20FRF10 .500" 1.000" .865" .687"
3/8" 20FRF12 .500" 1.000" .865" .687"
Also available in Black Oxide finish.

Fixed Lock Toggle

FIXED LOCK TOGGLE SWAGE 316SS
“L” CABLE PART PIN
DIA.
DRILL
NO.

Pin Drill is the recommended drill hole size for attaching
“L”
“D”
SWAGED NON-TENSIONERS “L” posts may be different than the fitting attachment posts.
47F4-3169
1/8"
5/16"
.250"
1.500"
.750”
47F4-3169
“D”
fittings to end posts. Drill hole diameters for intermediate
316SS
CRIMP
FIXED LOCK TOGGLE*
PART
CABLE
PIN

DRILL
“D”
NO.

DIA.
“L”
5/16"
1/8"
1.500"
47F4-3164
.218"
fittings to end posts. Drill hole diameters for intermediate
posts may be different than the fitting attachment posts.
47F4-3164 “D” .750” Pin Drill is the recommended drill hole size for attaching
*Requires 82TST20 Handy Crimp Tool.
See Tools, page 228.
68
Cat21 S4 68-73.indd 68 12/3/20 12:14 AM