Page 79 - Cable Art Inc Catalog

Threaded Terminals TENSIONERS

Threaded Stud (right hand)

The most cost effective cable attachment and tensioning
solution offers a very “clean” look. This system normally uses
a flat washer and hex nut for tensioning against the end vertical
posts in the run. A cap (acorn) nut is installed on the protruding
threads to finish off the attachment and lock the tensioning nut
in position. Use beveled washers for angled stair terminations.

“L”
“T”
“D”
“B”

THREADED STUD RIGHT HAND SWAGE 316SS
“T” “L” “B”
CABLE PART. THREAD OVERALL THREAD “D”
DIA. NO. SIZE LENGTH LENGTH DIA.
1/8" 10T40803 1/4"-28 RH 2.750" 1.500" .247"
1/8" 10T40805 1/4"-28 RH 3.500" 2.250" .247"
1/8" 10T40807 1/4"-28 RH 4.562" 3.250" .247"
5/32" 10T50803 1/4"-28 RH 3.150" 1.500" .295"
5/32" 10T50805 1/4"-28 RH 3.900" 2.250" .295"
5/32" 10T50807 1/4"-28 RH 4.900" 3.250" .295"
3/16" 10T60803 1/4"-28 RH 3.187" 1.500" .357" SWAGED TENSIONERS
3/16" 10T60805 1/4"-28 RH 3.970" 2.250" .357"
3/16" 10T60807 1/4"-28 RH 4.970" 3.250" .357"
3/16" 10T61003 5/16"-24 RH 3.265" 1.500" .357"
3/16" 10T61005 5/16"-24 RH 4.140" 2.375" .357"
1/4" 10T81003 5/16"-24 RH 3.780" 1.500" .424"
1/4" 10T81005 5/16"-24 RH 4.780" 2.375" .424"
1/4" 10T81203 3/8"-24 RH 3.775" 1.500" .424"
1/4" 10T81205 3/8"-24 RH 5.025" 2.750" .424"
5/16" 10T101603 1/2"-20 RH 5.930" 3.000" .634"
3/8" 10T121603 1/2"-20 RH 6.095" 3.000" .700"

HANDY CRIMP* CRIMP 316SS
1/8" 10T40813 1/4"-28 RH 1.500" 3.500" .215"
1/8" 10T40815 1/4"-28 RH 2.250" 4.250" .215"
3/16" 10T60813 1/4"-28 RH 1.500" 3.625" .295"
3/16" 10T60815 1/4"-28 RH 2.250" 4.375" .295"
3/16" 10T60817 1/4"-28 RH 3.250" 5.375" .295"
3/16" 10T61013 5/16"-24 RH 1.500" 3.625" .295"
For End Fitting Options, see pages 84-87. 3/16" 10T61015 5/16"-24 RH 2.375 4.500" .295"
Visit our website for installation instructions. *Requires 82TST20 Handy Crimp Tool. See Tools, page 228.

67

Cat21 S3 33-67.indd 67 12/2/20 11:43 PM