Page 193 - Cable Art Inc Catalog

0.5” Barrier Cable System

In-line Stressing-end Anchorage

1/4” Plate 1/4” Plate BARRIER CABLE SYSTEMS
7.25” 7.25”
Angled Wedge
6°

1.78” Dia.
4” (typ)
4” (typ)
Stressing-end device for end anchorages contained
within concrete columns/walls or attached to a steel
member on the exterior of the column/wall that does 1.78” Dia.
not allow normal stressing.
The coupler allows tensioning of and removes slack from
the barrier cables when ends are inaccessible. The in-line
assembly is complete with allowance for 11 barrier cables.
A special plate with holes machined at 4” centers allows for
code specified alignment of barrier cables. A special angled IN-LINE STRESSING-END STEEL
ANCHORAGE
assembly is available for ramps and special details that can TYPE OF PART
accommodate up to a 6-degree offset.
FITTING NO.
LEVEL 29A201306
ANGLED 29A201307
Tensioning Coupler System is zinc plated.

“L”

“D”
Floating device designed to connect ends of two barrier strands
together; thereby creating a continuous barrier cable between TENSIONING COUPLER STEEL
columns and/or supports. PART “L” “D”
NO. LENGTH BODY DIA.
This tensioning coupler removes the slack from the barrier cables when
ends are inaccessible and allows tensioning of the barrier cables when 29A201300 11.25" 1.78"
ends are inaccessible. Coupler is zinc plated.

Coupler Wrench

COUPLER
WRENCH
PART
NO.
29T201328

181

Cat21 S11 179-189 .indd 181 12/3/20 1:31 AM