Page 192 - Cable Art Inc Catalog

BARRIER CABLE SYSTEMS 0.5” Barrier Cable System

Bare and Encapsulated Barrel Anchors

3-Pc. Wedge 3-Pc. Wedge

Threaded Anchor
Cap
Fixed-end and stressing-end anchorages for barrier cables. 0.5” BARREL ANCHORS STEEL
Anchors can be connected to an angle/tube steel that is attached to concrete column/ TYPE OF PART
wall. They can be connected to a plate or washer on the outside of a concrete column. FITTING NO.
Barrels and wedges are zinc plated and can be exposed or encapsulated. Encapsulation SMOOTH 29A201301
caps come in concrete gray - custom cap colors are available by special order.
ENCAPSULATED 29A201302
Anchors are zinc plated.
In-line Fixed-end Anchorage

2.5”
2.5”
2.5” 2.5”
1/4” Plate 1/4” Plate
1/4” Plate
Angled Wedge
6°
4” (typ)
4” (typ)

Fixed-end device for end anchorages at concrete columns/walls, either IN-LINE FIXED-END STEEL
contained within the column/wall or exposed on the column’s exterior. ANCHORAGE
TYPE OF PART
The in-line assembly is complete with allowance for 11 barrier cables. Barrel FITTING NO.
anchors have spring-loaded wedges that are encapsulated. A special plate with
holes machined at 4” centers allows for code specified alignment of barrier LEVEL 29A201303
cables. A special angled assembly is available for ramps and special details that ANGLED 29A201304
can accommodate up to a 6-degree offset. Specify pipe length when ordering.

180

Cat21 S11 179-189 .indd 180 12/3/20 1:31 AM