Page 16 - Cable Art Inc Catalog

Cable Railing Kits

Cable railing Kits 4400/6400 Series ®

The 4400 (1/8”) and 6400 (3/16”) Series system utilizes an Invisiware
Receiver one end and a Push-Lock Lag fitting on the other end. System
®
is designed for Out / In post condition where one or both ends of the
assembly terminate into wood.
Attach the tensioner, measure and cut the bare end of the cable, insert
into the Push-Lock Lag fitting and tension.
This system works well in level runs.
4400 / 6400
FITTING OPTIONS
RECEIVER PAIRED
SIZE WITH
1-1/2"
PUSH-LOCK
2" LAG
3-1/2"

4401/6401 Series

The 4401 (1/8”) and 6401 (3/16”) Series system utilizes an Adjust-A-Body
®
®
Hangar Bolt tensioner on one end and a 1-1/2” Pull-Lock fitting on the
other end. System is designed for Out / In post condition where one or both
ends of the assembly terminate into wood. This system does not require
cutting cable to exact length.
Attach the tensioner, pull the bare end of the cable through the Pull-Lock
fitting, tension, and cut off the excess cable. Install the included Stainless
Steel Cap to finish.
This system works well in level runs.

4402/6402 Series

The 4402 (1/8”) and 6402 (3/16”) Series system utilizes an Adjust-A-Body
Hangar Bolt tensioner on one end and a Push-Lock Threaded Eye fitting on
the other end. System is designed for In / In post condition where one or
both ends of the assembly terminate into wood.
Attach the tensioner, measure and cut the bare end of the cable, insert into
the Push-Lock Eye Fitting and tension.
®

4

12/18/20 8:45 AM
Cat21 S2 1-32.indd 4 12/18/20 8:45 AM
Cat21 S2 1-32.indd 4