Page 34 - Cable Art Inc Catalog

Handy Grip System TENSIONERS

Simple and clean. Easy to install. No field swaging.
Similar to the machine swage and Handy Crimp style cable systems, this design
revolves around being a high-strength, yet compact, solution for swageless cable
terminations. Additionally, this system was designed to minimize the amount of the
new hardware components required, sharing the majority of end fitting choices
with its “swage type” counterparts.
The Handy Grip is offered for 1x19 and 7x7 cable strand configurations in both
1/8” and 3/16” cable diameters. Our hardware is made from high quality
316 grade stainless steel for superior corrosion resistance.
See page 27 for assembly instructions.
Termination Stud
swageless Fittings Turnbuckle “L” “C”

“T”

This system supports
316SS
any type of post with TERMINATION STUD TURNBUCKLE “B” “B” “L” “R” GRIP “R”
PART

CABLE
“C”
“T”
cable sizes of 1/8” DIA. NO. THREAD BODY OPEN CLOSED CAP SIZE ROD LENGTH
and 3/16”. Termination
rods are available for 1/8" 10A40150 1/4"-28 4.250" 10.250" 8.250" .562" 1.250"
up to 12”-thick posts 1/8" 10A40152 1/4"-28 4.250" 11.250" 9.250" .562" 2.250"
configurations. Typically 1/8" 10A40154 1/4"-28 4.250" 13.250" 11.250" .562" 4.250"
paired with Termination 1/8" 10A40156 1/4"-28 4.250" 15.250" 13.250" .562" 6.250"
Stud, page 25.
3/16" 10A60150 1/4"-28 4.250" 10.250" 8.250" .562" 1.250"
NOTE: Must have room 3/16" 10A60152 1/4"-28 4.250" 11.250" 9.250" .562" 2.250"
on outside of post to
insert length of threaded 3/16" 10A60154 1/4"-28 4.250" 13.250" 11.250" .562" 4.250"
rod chosen. 3/16" 10A60156 1/4"-28 4.250" 15.250" 13.250" .562" 6.250"
Designed for use with 1x19 or 7x7 strand only. Also available in Black Oxide finish.
Handy Grip to Handy Grip
Turnbuckle

“L”

“T” “B”
HANDY GRIP TO HANDY GRIP TURNBUCKLE GRIP 316SS
In-line turnbuckles are applied in longer
“T”
“B”
“L”
cable runs to ensure that proper tensioning CABLE PART THREAD BODY OPEN CLOSED
DIA.
NO.

of cable assembly can be achieved. May
be used in shorter runs to achieve a 1/8" 10A40352 1/4"-28 4.250" 11.000" 9.000"
certain desired look. Additional fittings 3/16" 10A60352 1/4"-28 4.250" 11.000" 9.000"
are required on both ends of the cable to Designed for use with Also available in Black Oxide finish.
complete the assembly. 1x19 or 7x7 strand only.
22

12/18/20 8:45 AM
Cat21 S2 1-32.indd 22 12/18/20 8:45 AM
Cat21 S2 1-32.indd 22