Guide Assembly

Guide Clamp - Large - DG-GC-SAT

Guide Clamp - Small - DG-GCK-SAT

Half Bolt-on BadAss™ Gate Hinge

Hand Swager, 1/4"

Hand Swager, 3/32", 1/8", 3/16"

Hand Swager, Ratcheting, 3/32"

Handy Crimp Deck Toggle (1/8") - (Import)

Handy Crimp Deck Toggle (3/16") - (Import)

1/8" Handy Crimp Deck Toggle Turnbuckle

3/16" Handy Crimp Deck Toggle Turnbuckle

Deck toggles provide a face-mount solution while allowing for angled takeoff. The deck toggle fittings are attached utilizing two screws through the deck toggle base.

Deck toggles provide a face-mount solution while allowing for angled takeoff. The deck toggle fittings are attached utilizing two screws through the deck toggle base. The mounting surfaces include wood posts or blocking, on either side of a common post by through-bolting, or drilling and tapping a metallic post. The articulation range of this deck toggle end fitting is 140 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Swage to Swage Turnbuckles are applied in longer cable runs with spacing approximately 30’-40’ ensuring that proper tensioning of a cable assembly can be achieved.