Page 106 - Cable Art Inc Catalog

Cable Railing Components

Drill Guide STEEL Cable Brace STEEL 304SS 316SS

Use the drill guide to drill your pilot holes. Clamp the guide to 1/4” x 1” cable braces are used to support the cables
post and drill. Subsequent drills will follow pilot holes. When between end or intermediate posts to keep the cable from
ordering, allow space for clamps. A 6” overall-length drill bit flexing excessively when a load is applied. Cable braces
is included. attach to the top rail and to the lower mounting surface
(a bottom rail or the deck). Available in mill finish carbon
steel or #4 finish stainless steel. Also available for stairs.

CABLE RAILING COMPONENTS
Contact us for
DRILL GUIDE ORDER FORM or visit our website.

Cable Brace

Mounting Plate Contact us for

CABLE BRACE ORDER FORM or visit our website.
For mounting cable
braces to top or bottom Stainless Steel
rail, stair, or deck.
Post Protector Tube

Available for level and slope conditions. The post protector
Material and finish choices include the following: tube is inserted into
• Carbon Steel - mill finished a wood post where
• Type 304 and Type 316 Stainless Steel- the cable enters/exits “L”
mill finished or #4 brushed finish the post at an angle to
keep the cable from
Visit our Website for complete list of options. biting into the wood. “F” “D”
CABLE BRACE MOUNTING PLATES STEEL 304SS 316SS
PART NO. MATERIAL DIMENSIONS POST PROTECTOR TUBE
“B”
50HCBP0101 Mill Finish Carbon Steel PART NOMINAL BODY “L” “F”
50HCBP0201 Mill Finish Stainless Steel NO. SIZE DIA. LENGTH FLANGE MATERIAL
50HCBP0301 #4 Finish Stainless Steel 2.25" x 1.25" x .25" 11HCST38 .206" .250" 1.580" .370" 316SS
50HCBP0111 Mill Finish C.S. (Stair Slope) 47HPS-3210 .206" .313" .910" .500" 316SS
50HCBP0211 Mill Finish S.S. (Stair Slope) 11HCST10 .252" .375" 1.600" .400" 304SS
50HCBP0311 #4 Finish S.S. (Stair Slope) 11HCST12 .335" .250" 1.500" .470" 304SS

94

Cat21 S6 84-97.indd 94 12/3/20 12:38 AM