6300 series stainless steel cable railing assemblies 2" long Receiver and Push-Lock® Threaded Eye fitting.

Use on straight runs or stairs.

An Invisiware® Receiver tensioning device is supplied on one end. Install the receiver into one end post, string cable through the intermediate posts, then cut your cable to length and install the Push-Lock® fitting with threaded eye on the other end. Tension the cable by turning the Receiver using an Allen wrench. Your choice of Invisiware® Receivers depends on the thickness of your end post.

To use on stairs or severe pitches

To use on stairs or severe pitches, the length of the receiver must be the same as the thickness of your end post. Choose from among the three different lengths of avialable receivers.

Bend the cable where it enters the receiver that approximates the pitch of the stairs. When you install the other end in the Push-Lock® with threaded eye and tension the cable, the cable will follow the pitch of the stairs. Instructions included with the order will illustrate how easily this is done.

At the bottom of this page order separately, P/N 20HLE4 lag eye (for wood post) or P/N 20HTT4 threaded tab (for metal post) to provide means to attach the Push-Lock® with threaded eye to the end post.

Click here for 6300 series Cable Assemby Instructions

Click here for our Cable Railing Assemblies How-To-Order Guide