• 250 Ft. Spool.
• Load Rating: 1,900 Lbs.

Lengths of cable are easily cut to make cable assemblies made in the field with SAF clips and to make field changes. Convenient spool sizes that are easy to move around job sites and always handy to do jobs where many different cable lengths are needed.

The same cable that is used to make our pre-assembled cable assemblies, only in bulk spools.

Use in combination with Loos zinc-plated oval sleeves and SAF clips to make secure brace connections that are stronger than the cable itself.

Seismic Braces Unique Features

Loos & Co's Seismic Braces are the only cable sway braces that:
• Are Third Party Listed (UL & ICC-ES ) for use in complying with NFPA 13 for fire sprinkler systems.
• Are Third Party Listed for use in complying with the International Building Code (IBC).
• Are Third Party tested/Listed to verify that cable assemblies, including fittings, maintain the cable nominal breaking strength per ASCE 19, as required by IBC, ASCE 7 and NFPA13.
• Have swaged end fittings as required by the 2012 IBC per ASCE 19-10, which does not permit wedge and clip type fittings.
• Certify the minimum breaking strength of the sway bracing assemblies.
• Comply with NFPA 13, ASCE 19, the IBC and ASCE 7.
• Are listed by FBC for system compatibility with Lubrizol CPVC pipe.

Click here for Web-based Trade Calculation Tools

Certified Minimum Break Strength (lbs) Allowable Load at 90° (lbs) Allowable Load at 30° - 44° (lbs) Allowable Load at 45° - 59° (lbs) Allowable Load at 60° - 89° (lbs) Min. Cable Diameter (in.) Max Cable Diameter (in.) 4,200 1,900 950 1,343 1,645 .1875 .2055

Number of Wires Wire Construction Nominal Dia. of Wires (in.) Min. Stress at 0.7% Extension Under Load Min. Ultimate Tensile Strength 133 7 x 19 .0125 to .016 150,000 PSI 300,000 PSI

Applied Load (lbs) Applied Load (% of Min. Break Strength) % Elongation at Applied Load Modulus of Elasticity 420 10% 0.17% 12.8 X 106 840 20% 0.31% 14.6 X 106 1,260 30% 0.44% 15.8 X 106 1,680 40% 0.56% 17.1 X 106 1,909 45.43% 0.58% 17.4 X 106 *45.43% is equal to the allowable working load (break strength ÷ 2.2)