- Push-Lock® Stud
- How It Works
- Installation Instructions
- Receiver Options
 |
|
To complete fitting, please click "Receiver Options" tab above for choice of tensioner.
 |
| How It Works Similar to our Invisiware® receivers, but when used with Push-Lock® studs there is no need to swage the threaded stud onto the cable. Receivers with Push-Lock® swageless studs can be used with any fitting on the other end, but when used with our other swageless fittings, both ends can be put on the cable by hand without any swaging or special tools. Push-Lock® studs are designed for use with 1x19 L.H. lay strand only. Push the cable into the Push-Lock® swageless stud, where it will be securely held inside the fitting. The receiver is female-threaded to accept the male-threaded end of the fitting. The head of the receiver is broached for an Allen wrench. To tension the cable, use an Allen wrench to rotate the receiver around the threaded end of the stud. |
|
|||||||||||||||||||||
 Printable Format (.pdf) |
