 |
Our Products
Shopping cart
Our services
|
|
Push-Lock® Anchor Bolt
- Push-Lock® Anchor Bolt
- How It Works
|
| Push-Lock® Anchor Bolt |
GRIP |
|
316SS |
CABLE
DIA. |
PART NO. |
"D"
BODY
DIA. |
"L"
LENGTH |
"T"
THREAD SIZE |
"C"
DIAMETER |
"X"
THREAD
LENGTH |
| 1/8" |
20FPLAB4 |
.43" |
1.810" |
3/8"-16 |
.490" |
.46" |
| 3/16" |
20FPLAB6 |
.43" |
1.810" |
3/8"-16 |
.490" |
.46" |
| Please click on part number to order. |
| Designed for use with 1x19 left hand lay strand only. |
|
 |
The Push-Lock® Anchor Bolt fitting is an exposed, swageless, non-tensioning, face-of-the-surface-mounted fitting that is suitable for use on level runs only, and is available for 1/8" & 3/16" diameter 1x19 stainless steel cable.
The Push-Lock® Anchor Bolt must be used with a tensioning fitting on the opposite end of the run. A concrete anchor is driven into a pre-drilled hole in the concrete surface. The anchor bolt portion of the fitting is threaded into the concrete anchor. The cable attaches to the fitting via the Push-Lock® locking wedge system which requires no special tools.
Recomended drop in anchors: 11HDAS12 (type 304), 11HDAS312 (type 316) |
|
|
