 |
Our Products
Shopping cart
Our services
|
|
Adjust-A-Body® Threaded Bolt Tensioners
- Adjust-A-Body® Threaded Bolt Tensioner
- How It Works
| Adjust-A-Body® with Threaded Bolt Tensioner |
SWAGE |
|
316SS |
Cable
Dia. |
Part No. |
Use with
Ferrule
No.* |
"A"
THREAD
(RH) |
"T"
THREAD
|
"L"
LENGTH |
"B"
BODY |
"D"
DIA. |
"N"
NUT |
"X"
THREAD
LENGTH |
"Y"
ROD
LENGTH |
"R"
THREAD
LENGTH |
| OPEN |
CLOSED |
| 1/8" |
20ATB4 |
20FF4 |
5/16"-24 |
5/16"-24 (LH) |
4.56" |
3.31" |
2.75" |
.500" |
.375" |
2.00" |
2.625" |
.375" |
| 3/16" |
20FF6 |
| 1/4" |
20ATB8 |
20FF8 |
5/16"-24 |
7/16"-20 (LH) |
5.00" |
3.50" |
3.00" |
.625" |
.500" |
2.50" |
3.125" |
.375" |
| 5/16" |
20ATB10 |
20FF10 |
1/2"-20 |
1/2"-20 (RH) |
7.25" |
5.37" |
4.50" |
.75" |
.625" |
3.00" |
4.00" |
.625" |
| 3/8" |
20FF12 |
| Please click part number to order. |
| *Order Ferrule separately |
|
|
How It Works
The mounting end on each of our Adjust-A-Body® tensioners has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.
Adjust-A-Body® with Threaded Bolt Tensioner
Used on straight runs, this tensioner screws into a drilled and tapped hole in your metal post. There is no need for special tees with holes, welded tabs, or any other mounting device. Recommended for level runs using a minimum schedule 80 pipe or square or rectangular steel tubing with a minimum .250” wall.
|
|
|
|
