 |
Our Products
Shopping cart
Our services
|
|
Adjust-A-Body® Hanger Bolt Tensioner
- Adjust-A-Body® Hanger Bolt Tensioner
- How It Works
| Adjust-A-Body® with Hanger Bolt Tensioner |
SWAGE |
|
316SS |
Cable
Dia. |
Part No. |
Use with
Ferrule
No.* |
"A"
LAG
THREAD |
"T"
THREAD
(LH) |
"L"
LENGTH |
"B"
BODY |
"D"
DIA. |
"N"
NUT |
"R"
THREAD
LENGTH |
"X"
THREAD
LENGTH |
"Y"
ROD
LENGTH |
DRILL
SIZE
REQUIRED |
| OPEN |
CLOSED |
| 1/8" |
20ALB4 |
20FF4 |
5/16" |
5/16"-24 |
4.50" |
3.31" |
2.75" |
.500" |
.375" |
1.50" |
2.00" |
3.75" |
15/64" |
| 3/16" |
20FF6 |
| 1/4" |
20ALB8 |
20FF8 |
1/2" |
7/16"-20 |
5.00" |
3.75" |
3.00" |
.625" |
.500" |
2.00" |
2.50" |
4.75" |
23/64" |
| *Order Ferrule separately |
| Minimum nominal timber size 4x4 |
|
|
How It Works
The mounting end on each of our Adjust-A-Body® tensioners has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.
Adjust-A-Body® with Hanger Bolt Tensioner.
This tensioner screws right into your wooden end post. There is no need for special mounting hardware.
|
|
|
|
