Cable/Wire Grips 3/16" - 7/8" Cable, 5,000 lbs.

Cable/Wire Grips 5/16" - 1-1/8" Cable, 12,000 lbs.

For use on 1/8" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

For use on 3/16" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

For use on 1/8" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

For use on 3/16" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

CAI Barrier Swage Studs are available with right or left handed threads.
CAI can factory swage studs on one end or both ends of the cable to final field lengths.
Left handed threads allow incorporation of turnbuckles if required.
(factory installed)

For use on 1/4" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

For use on 1/8"" and 3/16" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

For use on 1/4" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

For use on 1/8"" and 3/16" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

For use on 5/16" and 3/8" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

Carbon Steel Base Plate 2 1/2" x 4" x 1/4"
Mill Finish - No Holes

Carbon Steel Base Plate 2 1/2" x 4" x 1/4"
Mill Finish - With Holes

Carbon Steel Base Plate 3 3/8" x 3 3/8" x 3/16"
Mill Finish - No Holes