For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts with composite sleeves) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts with composite sleeves) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Lag (for wood posts) addresses those needs.

Similar to our Invisiware® receivers, but when used with Push-Lock® studs there is no need to swage the threaded stud onto the cable. Receivers with Push-Lock® swageless studs can be used with any fitting on the other end, but when used with our other swageless fittings, both ends can be put on the cable by hand without any swaging or special tools.

Similar to our Invisiware® receivers, but when used with Push-Lock® studs there is no need to swage the threaded stud onto the cable. Receivers with Push-Lock® swageless studs can be used with any fitting on the other end, but when used with our other swageless fittings, both ends can be put on the cable by hand without any swaging or special tools.

Push-Lock® Tensioner with Extended Hanger Bolt (1/8")

Push-Lock® Tensioner with Extended Hanger Bolt (3/16")

Push-Lock® Tensioner with Extended Lag Clevis (1/8")

Push-Lock® Tensioner with Extended Lag Clevis (1/8") (OLD STYLE)

Push-Lock® Tensioner with Extended Lag Clevis (3/16")