Beveled Washers are designed for use with many of our end fitting options without post modifications. The designed angles are 30° through 37°
• compliant with most conventional stair systems.

Beveled Washers are designed for use with many of our end fitting options without post modifications. The designed angles are 30° through 37°
• compliant with most conventional stair systems.

Beveled Washers are designed for use with many of our end fitting options without post modifications. The designed angles are 30° through 37° compliant with most conventional stair systems.

Beveled Washers are designed for use with many of our end fitting options without post modifications. The designed angles are 30° through 37°
• compliant with most conventional stair systems.

Beveled Washers are designed for use with many of our end fitting options without post modifications. The designed angles are 30° through 37°
• compliant with most conventional stair systems.

Button Head Allen Screw (Black Oxide) -Thread 3/8"-24, Length .750"

Button Head Allen Screw (Black) -Thread 1/8"-28, Length .500"

For use on 1/8" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

For use on 3/16" cable diameter.

Same as our CAI Fixed Jaw fittings, except the cable is attached to the fitting with a special clip that is installed on site by hand. The cable is supplied by the factory with a tensioner on one end and a ferrule on the other end. There is no field swaging.

For use on 1/4" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

For use on 1/8"" and 3/16" diameter cable.

Often used with our Adjust-A-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.

1/4" Cable Diameter.

Often used in combination with the Invisiware® receiver, this fitting is also hidden inside the end post with only the head exposed on the outside of the post. When installed, it looks the same as the Invisiware® receiver except it costs much less.

1/8" Cable Diameter.

Often used in combination with the Invisiware® receiver, this fitting is also hidden inside the end post with only the head exposed on the outside of the post. When installed, it looks the same as the Invisiware® receiver except it costs much less.

3/16" Cable Diameter.

Often used in combination with the Invisiware® receiver, this fitting is also hidden inside the end post with only the head exposed on the outside of the post. When installed, it looks the same as the Invisiware® receiver except it costs much less.

Invisiware® receivers are used with pipe and with round, square or rectangular metal tubing or wood posts.