Push-Lock® Tensioner with Threaded Bolt (1/8")

Push-Lock® Tensioner with Threaded Bolt (3/16")

Push-Lock® Tensioner with Threaded Tab Clevis (1/8")

Push-Lock® Tensioner with Threaded Tab Clevis (3/16")

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Threaded Bolt(for metal posts) addresses those needs.

For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Threaded Bolt(for metal posts) addresses those needs.

Push-Lock® Threaded Bolt, Series 2 (1/8")

Push-Lock® Threaded Bolt, Series 2 (3/16")

Push-Lock® fittings are designed for use with 1x19 L.H. lay cable only. They can be used with any tensioning device on the other end...but when used with our swageless tensioners, both ends can be put on the cable by hand without any swaging or special tools.

Push-Lock® fittings are designed for use with 1x19 L.H. lay cable only. They can be used with any tensioning device on the other end...but when used with our swageless tensioners, both ends can be put on the cable by hand without any swaging or special tools.

1/8" Push-Lock® with Extended Lag Clevis

1/8" Push-Lock® with Extended Lag Clevis (OLD STYLE)

3/16" Push-Lock® with Extended Lag Clevis

3/16" Push-Lock® with Extended Lag Clevis (OLD STYLE)

Push-Lock® with Lag Clevis(1/8")