The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

The Handy Crimp, Stud to Stud Turnbuckles are applied in longer cable runs with spacing approximately 30"-40" ensuring that proper tensioning of a cable assembly can be achieved. Additionally, these assemblies can be positioned to achieve a certain desired look in shorter cable runs. These fittings are fully compatible with any of our termination style fittings. An additional fitting is required on both ends of the cable to complete the assembly.

Handy Crimp Tool P/N 11HCT1 Required.

The Handy Crimp, Stud to Stud Turnbuckles are applied in longer cable runs with spacing approximately 30"-40" ensuring that proper tensioning of a cable assembly can be achieved. Additionally, these assemblies can be positioned to achieve a certain desired look in shorter cable runs. These fittings are fully compatible with any of our termination style fittings. An additional fitting is required on both ends of the cable to complete the assembly.

Handy Crimp Tool P/N 11HCT1 Required.

The Handy Crimp, Stud to Stud Turnbuckles are applied in longer cable runs with spacing approximately 30"-40" ensuring that proper tensioning of a cable assembly can be achieved. Additionally, these assemblies can be positioned to achieve a certain desired look in shorter cable runs. These fittings are fully compatible with any of our termination style fittings. An additional fitting is required on both ends of the cable to complete the assembly.

Handy Crimp Tool P/N 11HCT1 Required.

The Handy Crimp, Stud to Stud Turnbuckles are applied in longer cable runs with spacing approximately 30"-40" ensuring that proper tensioning of a cable assembly can be achieved. Additionally, these assemblies can be positioned to achieve a certain desired look in shorter cable runs. These fittings are fully compatible with any of our termination style fittings. An additional fitting is required on both ends of the cable to complete the assembly.

Handy Crimp Tool P/N 11HCT1 Required.

Termination Studs are a very clean and cost effective method of completing the non-tensioning end of a cable assembly, as they can be used with any type or style of post.

Handy Crimp Tool P/N 11HCT1 Required.

Termination Studs are a very clean and cost effective method of completing the non-tensioning end of a cable assembly, as they can be used with any type or style of post.

Handy Crimp Tool P/N 11THCT1 Required.

This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

Handy Crimp Tool P/N 11HCT1 Required.

                    Please select, based on the post thickness.