This system supports any type or style of post. Termination Rods are available for up to 6" posts on-line. For over 6" and up to 12" thick post configurations, call for availability.

Handy Crimp Tool P/N 11HCT1 Required.

                    Please select, based on the post thickness.

Countersunk Termination Studs are used to obtain a smooth terminating surface and are a very clean and cost effective method of completing the non-tensioning end of a cable assembly, as they can be used with any type or style of post.

Handy Crimp Tool P/N 11HCT1 Required.

Countersunk Termination Studs are used to obtain a smooth terminating surface and are a very clean and cost effective method of completing the non-tensioning end of a cable assembly, as they can be used with any type or style of post.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

The Lag Stud has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.

The Lag Stud has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.