Proper cable tensioning is an important part of the installation and long term performance of railings using CableRail stainless steel infill. This easy to use tool is great for installers looking for a faster and more effective way to tension CableRail assemblies.

Save time and material costs

• 6X gear ratio lets installers tension CableRail with minimal effort
• Increased tensioning power allows for longer cable lengths, lowering material costs
• Reduces the need for additional tensioning at the threaded terminal end, leaving more thread for future adjustments

Specially designed for CableRail by Feeney®

• Works with 1/8-in., 3/16-in.*, and 1/4-in.* diameter stainless steel CableRail in a wide variety of post materials.
• Built-in tension indicator ensures consistent tension is applied to the cable everytime, optimizing ease of installation
• Tough enough to handle any jobsite
• Compact and Lightweight

* NOTE: Tensioning Tool includes the 1/8-in. diameter cable adapter head. The 3/16-in. and 1/4-in. diameter cable adapter head is available here.

Trim cables to 8-in. (6-in. is the minimum). Use the dial at the base of the handle to set the tension indicator to the lowest level, "Start". Spread handles and insert cable into the tool. Confirm that the cable is fully seated in the channel at the gripper jaw. Insert head of the tool into the Quick-Connect® fitting. Close the handles smoothly to tension cable. An audible "click" and a slight kickback at the handles indicates the selected tension has been applied to the cable. If a higher tension level is required, adjust the tension indicator as needed – do not exceed “Max” level. (repeat steps 3-6).