 |
Our Products
Shopping cart
Our services
|
|
Push-Lock® Threaded Eye
- Push-Lock®
- How It Works
- Installation Instructions
| Push-Lock® Threaded Eye |
GRIP |
|
316SS |
Please click part number to order.
Designed for use with 1x19 left hand lay strand only. |
|
How It Works
Push-Lock® Fittings are installed by hand, to avoid the need to swage fittings in the field. Cables are supplied a little longer than necessary, with tensioners on one end and bare cable on the other end. The tensioners are installed on one end post, then the cables are cut to final length. The Push-Lock® with threaded eye Fittings are attached to the end post with a tab on the inside of the post. The cables are then pushed into the Push-Lock® Fittings by hand. The cables are tensioned, to complete the installation.
The Push-Lock® with threaded eye fittings are used on angled or level runs. They mount to Lag Eyes or Threaded Tabs in the end post. For wood applications, Also order P/N 20HLE4 Lag Eye and for Metal applications, order P/N 20HTT4 Threaded Tab. |
|
|
|
