How It Works
For level runs where cable must be terminated on the inside of the post.
For level runs where the back side of the post is not accessible, so the cable must terminate in a fitting on the inside of the post, the Push-Lock® Extended Lag, (for wood posts with composite sleeves or when required to pass through stucco or siding into wood blocking) addresses those needs.

The Push-Lock® Extended Lag is actually two components that fit together: the lag and the Push-Lock® coupler. The lag is slotted for an allen wrench on one end to make it easy to screw into the post. Once installed thread the Push-Lock® coupler onto the lag and you're ready to insert the cable.

The Push-Lock® Extended lag is not a tensioning device, so the other end of the cable run will require a tensioner.